B.Skills for installation of baseboard Lengthwise conncetion:Use installation clasps to embed three-ply boards and apply glue to the joints.
Fix with headless nails and fill the nailed dents with color cream.
Treatment of inward corners:Make sure that it is 45°meeting on the top of the baseboard at the corner.
Treatment of ouward corners:The two boards meet each other in full in an angle of 45°.Apply glue and enhance the joint with 20mm shooting nail.
Treatment of exposed ends:Mend the end by cutting the end and leaving its top to be a tip of a 45°angle.
Treatment of loose seams:Do the best to avoid cutting the baseboard.If the floor is not even.more cushions can be added to tighten joint between the baseboard and the floor.

C.Use of outward corner clasp
Categores:Inward corner clasp,outward corner clasp,connection clasp,end clasp.
Functions:Applied to outward corners and inward corners lengthwise Connection,covering of exposed ends,and linking.
Purposes:Solve problems of its extension,linking and edge covering,and at the same time produce effect of beautification and decoration and lighten workload.

2.Pressing Bars
Materrial:TiAl alloy,aluminum alloy grain covering,wearproof
Types:Four types of pressing bars are frequently used:transitional,bordering,leaning,Stairs.
1)Transitional press bar:It is a"shaped"pressing bar for different heights.When flooring materials of different heights are applied to two neighboring rooms.such bars bring a smooth transition of 5-15mm.
2)Bordering press bar:it is a "T-shaped"level pressing bar and used as the border when the flooring installation is by section and room.
3)Leaning pree bar:It is a-shaped pressing bar used for close-up and edge finish-up when baseboard can not be applied.
4)Stair press bar:It is a F-shaped press bar used for close-up of the stair flooring and slipping prevention.
Installation:Hitching installarion
Treatment skills:
1)Under the door pane:construction standard the floor border is directly under the pane of the closed door.

Note:If this position is already covered with other materials,necessary treatment should be carried out.
2)Borders of a large area:Apply pressing bars reasonably.For large area of flooring,the pressing bars should be placed at the divisions between flooring sections of different colors,patterns and syles so as to lower the possibility of spoiling the visual effct of the whole flooring by pressing bars.
3)Finish up edges:Can not be finished up edges with baseboard,or the face of wall bad alrady decorated with wooden materials,such as wall-skirt,closet,etc.
4)Firm and Stable:When installation hitching,appropriately adding the transparent glue call enhance firmness and avoid making sounds in use.

3.Corners:
When baseboards and pressing bars can not be used to close up the flooring.10-18mm outward corner lines.inward corner lines and semicircular lines can be adopted.